slide5
slide1
slide3
slide2
slide4

VEL1-SSP 19" Rolltru Premium Stainless Spoke Set for Velocette 7'' Single Sided Front with 5.5" PCD Non Brake Flange

Devon Rolltru Part Code

VEL1-SSP.

Bike Fitments = 350 OHC, 500 OHV, KES, KSS, KTS, KTT, MAC, MAF, MOV, MSS, USS, & more if fitted with this same hub

Please Take Care! There are 2 Velocette 7" Single Sided Front Hubs, please check the hub picture supplied in this listing carefully to be sure you have selected the correct Spoke Set for your Application.

Spoke Set for Velocette 7" Large Flange Single Sided Front Hub on a 19" Rim

The Non Brake Side Flange on these hubs measures approx 5.5" PCD accross the spoke holes

*If you have the Smaller Non Brake Side Flange with approx 3.1" PCD please see parts codes starting with VEL3

Manufactured from Premium Grade 950 - 1050 N/mm2 High Quality U.K. produced Stainless Steel Wire and completed as Spoke Sets right here in England. supplied as follows.

Spokes are Rolltru  Single Thickness 10 gauge 3.2mm as per original OEM Specification

9 off 10 gauge Spokes Bent to Brake Side Inner Specification

9 off 10 gauge Spokes Bent to Brake Side Outer Specification

18 off 10 gauge Spokes Bent to Non Brake Side Specification

36 x 10 Gauge .250" Brass Nickel Plated Nipples

These Spokes are manufactured for a standard OEM 2 Cross Pattern on both the Brake Side & Small Flange of this hub.

100%

MADE IN ENGLAND

Write a review

Please login or register to review
  • Product Code:VEL1-SSP
  • Availability:In Stock
  • £100.00

  • Ex Tax:£83.33