Devon Rolltru Spoke Part
Code = MC289-SSP
Bike Fitments = Atlas, Commando, Dominator & more if fitted with this same hubs
Please make sure your Hub matches the one we show in this listing
Stainless Steel Spoke set for Standard Norton Disc Rear Hub on 19” Rims
Manufactured from Premium Grade 950 - 1050 N/mm2 High Quality U.K.
produced Stainless Steel Wire and completed as Spoke Sets right here in
England. supplied as follows.
Spokes are Rolltru Premium Single
Thickness 8 gauge 4.0mm as per original OEM Specification
Set consists of the following components
10 x 8 gauge Spokes Bent to Brake Side Inner Specification
10 x 8 gauge Spokes Bent to Brake Side Outer Specification
10 x 8 gauge Spokes
Bent to Drive Side Inner Specification
10 x 8 gauge Spokes
Bent to Drive Side Outer Specification
40 x 8 gauge .300" Brass Nickel Plated Nipples
This Spoke Set is manufactured for a standard OEM 2 Cross Pattern on the Drive Side & a 3 Cross Pattern on the Disc Side.
Due to nature of the huge Off Set on these Wheels when finished and the variety of flange thickness out there we have had to modify the Neck Length on the Outer Spokes Supplied. This is to ensure the finished Wheel Build is a strong as possible. You may need to ease the Spoke over once in the Hub in order to get the perfect angles, those experienced builders out there will know this is not uncommon on a lot of these old bikes.
100%
MADE IN ENGLAND
- Product Code:MC289-SSP
- Availability:In Stock
-
£120.00
- Ex Tax:£100.00